Why spreadsheets and calendar checks stop working
Required minimum distributions create a recurring operational job for advisory firms. Someone has to identify which clients need attention, confirm the relevant details, track the deadline, contact the client, record the response, and follow up when something is missing.
For a small firm, that work often lives in a spreadsheet, a shared calendar, a CRM task list, and an adviser’s memory. Each tool holds part of the picture. None gives the owner a reliable view of which cases are clear, which need a decision, and which are at risk of going quiet.
The problem isn’t that a spreadsheet can’t store a date. It’s that RMD work depends on more than dates. Client circumstances change. Account information may be incomplete. A client may need to confirm an instruction. A transfer or distribution may be underway. And the person who spots an exception needs to know who owns the next step.
This is how routine tracking turns into deadline checking by hand. A staff member compares a client list against notes and calendar reminders, asks an adviser to confirm a detail, then tries to remember whether the client replied. When the person who knows the process is away, the firm may have to reconstruct the case from scattered records.
A better process centralizes the work in one queue, then routes exceptions to the right person. It gives the team a clear answer to four questions:
- Which clients need an RMD review?
- What information is confirmed, and what still needs checking?
- Who owns the next action?
- Is the case on track, waiting, or at risk?
The goal isn’t to have software make financial or tax decisions. It’s to reduce the manual work of finding, sorting, and following up on cases, while keeping adviser review and firm policy in control.
Map the work before choosing the system
Start by writing down how an RMD case moves through your firm today. Keep the first pass practical. You don’t need a polished process map. You need to see where the work begins, where it gets stuck, and where ownership becomes unclear.
A typical workflow might include these steps:
- Build the annual list of clients and accounts that need review.
- Check account and client information against the firm’s records.
- Identify missing details or circumstances that require adviser review.
- Assign a case owner and a target date for the next action.
- Contact the client or coordinate with the relevant provider.
- Record the response, instruction, or unresolved question.
- Confirm the case is complete according to the firm’s process.
- Retain a record of what happened and who reviewed it.
The handoffs deserve special attention. A case can be easy to overlook when one person identifies the client, another checks the account, and an adviser approves the next step. If the case owner isn’t clear, each person may assume the next person is handling it.
Look at the source data, too. Which records are considered authoritative for client details and account information? Which fields are routinely missing? How does the team handle a client with multiple accounts, a recent transfer, or a question that needs adviser judgment? Your new workflow should make those uncertainties visible rather than quietly treating them as complete.
For more on the process itself, see this guide to automating RMD tracking for advisory firms. It’s useful to compare your current handoffs with a more structured deadline workflow.
Replace reminders with a deadline and exception queue
A centralized workflow should show the whole caseload in one place, but it shouldn’t make every case look the same. A simple status system helps the team focus on the work that needs attention.
For example, a case might be marked as:
- Needs review: A person needs to confirm the client or account information.
- Ready for action: Required details are present and the next action can be assigned.
- Waiting on client: The firm has contacted the client and is waiting for a response.
- Waiting on provider: The team is waiting for information or processing.
- Escalated: An adviser or designated reviewer needs to decide what happens next.
- Completed: The case meets the firm’s completion criteria and has a record of review.
Each case should have a named owner, a next action, and a due date. “Follow up with client” is not enough on its own. The team should be able to see when contact was made, what response came back, and when the next follow-up is expected.
This also helps keep exceptions from disappearing inside a general task list. A client with an unresolved question should not appear identical to a client whose case is ready for a routine next step. The queue can sort by urgency, status, or assigned person, so a team member starts the day with a workable list instead of searching across email, calendar entries, and notes.
Set a clear rule for escalation. For instance, the workflow might route a case to an adviser when a required field is missing, records conflict, or the client’s situation falls outside the firm’s standard process. The agent can flag the issue and summarize the records it found. The adviser remains responsible for reviewing the facts and deciding what to do.
That distinction matters. Automation should help the team spot and route work. It shouldn’t silently decide whether a distribution is appropriate or substitute for the firm’s compliance process.
What an RMD workflow agent does from start to finish
An agent for this work sits on top of a process the firm has defined. It doesn’t replace the CRM or invent firm policy. Its job is to move cases through agreed steps, surface missing information, and keep the work visible.
A practical end-to-end flow could look like this:
1. Build the worklist. At the start of the review cycle, the agent gathers the records the firm has approved for the workflow and prepares a list for human review. The team can see which clients and accounts are included and where the underlying data came from.
2. Check for gaps and inconsistencies. The agent compares the required fields with the firm’s checklist. If information is missing, stale, or inconsistent across records, it marks the case for review rather than assuming which entry is correct.
3. Create the next task. For a case that’s ready to move forward, the agent assigns the next action to the appropriate role and places it in the deadline queue. The task includes the context a staff member needs to act, not just a reminder to open another system.
4. Prepare client follow-up. If the firm’s process calls for client contact, the agent can draft a message using approved language and the relevant case details. A staff member reviews the draft before it goes out. The workflow then records that the message was sent and sets the next follow-up date according to firm policy.
5. Route replies and exceptions. When a client responds or new information arrives, the agent can attach it to the case, update the status, and flag anything that needs a person to decide. A case that can’t proceed stays visible as an exception. It doesn’t vanish because a reminder was marked complete.
6. Close with a review record. Once the required actions are finished, the agent prepares a concise summary of the case activity for review. The designated staff member confirms that the firm’s completion criteria have been met before the case is marked complete.
That sequence gives a firm a consistent way to manage routine work without treating every client as routine. It also creates a better handoff when a case changes owner. The next person can see what has happened, what remains unresolved, and who needs to act.
If missed follow-ups are a wider issue in your firm, this article on stopping missed client follow-ups looks at the same operational weakness across client work. The same principle applies: a reminder needs an owner, a status, and a next action.
Keep the controls clear
A centralized queue is only useful if the firm trusts the information in it. Set basic controls before automating client-facing work.
First, decide which systems and records the workflow can read. Make the source visible to the people reviewing the case. If two records conflict, the agent should flag the discrepancy instead of choosing one without a rule.
Second, define what the agent may do without approval. For many firms, it can prepare a worklist, draft a message, create an internal task, and summarize case activity. A person should approve client communications and any action that requires judgment under the firm’s process.
Third, decide who can change a case’s status. If anyone can mark a case complete, the status won’t tell the owner much. Tie completion to a checklist and a named review role.
Finally, keep a record of changes and decisions. The team should be able to see when information was added, who reviewed an exception, and what action followed. A workflow that saves a few minutes but leaves a weaker record isn’t a good trade for an advisory firm.
These controls aren’t unique to RMD work. They’re part of a broader approach to preventing missed client deadlines, where the firm makes ownership and exceptions visible rather than relying on someone to remember.
Measure the work and the business impact
Before changing the process, get a rough baseline. You don’t need time tracking down to the minute. For a sample of cases, note how many staff touches are needed, how long cases remain open, how often a person has to search for information, and how many cases need an adviser to resolve an exception.
Then track the same measures after the workflow is in use. Useful measures include:
- Time spent building and checking the annual worklist.
- Number of cases with missing or conflicting information.
- Number of overdue follow-ups.
- Average time from opening a case to its final review.
- Staff time spent finding the status of a case.
- Cases escalated to an adviser, and why.
For an advisory firm, reducing low-value administrative work can free up staff capacity. Staff time spent reconciling spreadsheets and chasing updates is time not spent on client service or higher-value work. It can also create avoidable risk when a deadline is overlooked or a case has no clear owner.
Across this vertical, reducing manual work may improve operating efficiency. Use your own baseline to estimate what this workflow can change. Use your own baseline to estimate what this workflow can change. Start with hours spent, cases delayed, and the cost of the people doing the work.
To see how this could fit your firm, book an Omni Audit. The session focuses on your current process.
Fit the workflow into the wider client operation
RMD tracking usually touches several parts of the business. The person checking account details may also prepare client meetings or support onboarding. That’s why it helps to examine the surrounding work without turning an RMD project into a broad software overhaul.
A meeting-preparation workflow can organize information for a client review. An advice-document workflow can help prepare documents for staff review. A client-onboarding workflow can help organize information for the adviser.
These are separate workflows, but the operating principle is the same. The agent organizes information and prepares the next step. The firm sets the rules, assigns an owner, and reviews decisions that need professional judgment. If onboarding is another source of manual follow-up, this guide to AI client onboarding for advisory firms covers that process in more detail.
For a broader view of what Omni supports in this sector, see Omni for financial advisory firms. The audit helps identify where a focused deadline workflow fits alongside other operational priorities.
A practical rollout for the next cycle
You don’t need to automate every client or every edge case at once. Start with a controlled group and a workflow the team can verify.
Week one: document the current process. Identify the people involved, systems used, recurring handoffs, and common exceptions. Agree on what counts as complete.
Week two: define the queue. Choose the statuses, required fields, ownership rules, escalation path, and client communication approvals. Use real cases to check whether the categories make sense.
Weeks three and four: test with staff review. Run a sample of cases through the workflow. Compare the agent’s worklist and exception flags with what an experienced staff member finds manually. Record misses and false alarms, then adjust the rules.
After the test: expand with evidence. Add more cases only when the team can explain why the workflow is reliable, where it needs human review, and how to handle exceptions. Keep a route for staff to correct records and report problems.
That gradual approach avoids a common mistake: moving a messy spreadsheet into a new tool without fixing the process underneath. Centralization helps, but only when the firm knows which records matter and who acts next.
Turn deadline tracking into an owned process
The practical replacement for spreadsheet and calendar checks is not another reminder. It’s a shared workflow that gives each RMD case a status, owner, next action, and review path. It brings exceptions forward instead of leaving staff to find them by hand.
For the owner, the benefit is operational clarity. You can see what is moving, where work is stuck, and whether the team is spending time on routine follow-up that could be organized more consistently. Advisers keep control of decisions, and staff can spend less time assembling the same status picture from multiple systems.
If you want to map the first version around your firm’s systems and responsibilities, book an Omni Audit. You can also see the AI audit for financial advisory firms and decide whether the approach fits the way your team works.
Your guide is ready
Check your downloads folder. If it did not open automatically, use the button below.
Download the GuideYour guide is ready
Check your downloads folder. If it did not open automatically, use the button below.
Download the GuideTalk it through
Talk it through with Sam
30 minutes on what a Command Centre would look like for your business.
Book a call